Trident makes a range of adsorption type compressed air dryers which are regenerated by heat. The adsorbants activated alumina or molecular sieve renegenrates on heating. These type of Dryers are energy efficient for dew points below -20 deg C for large air flows. There are several ways heating the bed of desiccant. The most common along with Trident series are as below:
Blower Heat Reactivated Air Dryer (Series DB) - To view catalog click here
Trident Blower Heat Reactivated Air Dryers offers a very good dew point depending on the requirement. These dryers are useful for instrumentation air meeting the quality requirement of ISA S7.34. Available for any higher capacity from 500 cfm to 4000 cfm.
No-loss Split Flow Air Dryer (Series DS) - To view catalog click here
Trident makes split flow dryers offers dewpoint of -40°c depending on the requirements. These dryers utilize heated part of air for regeneration and there is no air loss in this type of dryer. These dryers are available for any capacity higher than 500 scfm.
Internal Heated Type Air Dryer (Series DI)
Trident makes internal heated dryer offers good dewpoint. Heaters are kept inside the insulated tower and the tower is heated to the required temperature and pumped. These dryers are available for any capacity higher than 500 scfm.
Heat of Compression Air Dryer (Series DC)
These dryers use the hot air from compressor and utilize this energy to regenerate. They are very energy efficient
These dryers are made to suit individual application. Please contact with your requirement. |
Features
